The RT9045 is a simple, cost-effective and high-speed linear regulator designed ,to generate termination voltage in Double Data Rate (DDR) memory system to ,comply with the devices requirements. The regulator is capable of actively ,sinking or sourcing up to 1.8A while regulating an output voltage to within ,20mV. The output ter...
Products ▶ Memory Power Solutions ▶ RT9045
|
The RT8973A is a USB port accessory detector and switch that is optimized to ,protect low voltage system from abnormal high input voltage (up to 28V). The ,RT8973A supports high speed USB operation and I2C interface control. The ,RT8973A provides a device detection function by using the USB ID pin signal and ,the VBUS voltage. T...
Products ▶ Switches ▶ RT8973A
|
The RT8979 is a USB port accessory detector and switch (USB1, USB2, UART & ,MHL). The RT8979 adopts I2C bus for control and also uses an internal method to ,determine the connected device.The RT8979 provides a device detection function ,by using the USB ID signal pin and the VBUS voltage. The ID pin resistance and ,VBUS voltage ...
Products ▶ Switches ▶ RT8979
|
The RT9752 is a USB Type-C Downstream Facing Port (DFP) controller with back to ,back power switch which offers 28V tolerance on VOUT pin at off state and 3A ,rated supply current for VBUS for USB Type-C applications. The RT9752 have ,Configuration Channel (CC) function to determine when USB device is attached. ,If the Upstream ...
Products ▶ Switches ▶ RT9752
|
The RTQ9740A is a small, ultra-low RON, dual channel load switch with EN ,controlled pin. The product contains two N-MOSFETs that can operate between an ,input voltage range of 0.8V to 5.5V. Also, it supports a maximum continuous ,current of 6A each channel. Each switch is independently controlled by EN pins ,(EN1 and EN2), whic...
Products ▶ Switches ▶ RTQ9740A
|
Richtek has launched an extensive and dedicated range of products specially designed for USB PD and USB Type-A/Type-C fast charging applications since USB interface has become an ubiquitous charging standard. We have also developed design tools to accelerate your design process.
Applications ▶ Automotive & e-Mobility ▶ Digital Cockpit
|
The RT1650 is a wireless power receiver compliant with WPC low power V1.1 standard. The RT1650 integrates a synchronous full-bridge rectifier, a low dropout regulator, and a Micro Controller Unit (MCU) for control and communication. The device receives AC power from a WPC compatible wireless transmitter and provides output power...
Design Support ▶ Design Reference ▶ EVB_RT1650WSC
|
The RT1710S is a Type-C cable ID for active and passive cables.All USB Full-Featured Type-C cables shall be electronically marked. Electronically marked cables shall support USB Power Delivery Structured VDM Discover Identity command directed to SOP'. This provides a method to determine the characteristics of the cable, e.g. its...
Design Support ▶ Design Reference ▶ EVB_RT1710SGQW
|
The RT6266 is a high-efficiency, monolithic asynchronous step-down DC/DC converter that can deliver up to 2.4A output current from a 7.5V to 36Vinput supply. The RT6266’s current mode architecture with internal compensation is optimized for 5V car charger application over a wide range of loads and output capacitors. Cycle-by-cyc...
Design Support ▶ Design Reference
|
Buck-Boost, USB PD, USB-C charger, Power Bank
About Richtek ▶ Product Newsletters ▶ Newsletter Issue 46
|